iPhone XR earpiece Original Apple

€18.99

Tax included

The internal replacement earpiece for iPhone XR gives you the ability to hear your callers correctly. Dustproof grid located just behind the included screen (strongly advised to change it at the same time).

The Tool kit and waterproof screen stickers are also available on our website.

Quantity

STOCK ITEM DELIVERY 1 - 3 DAYS

Customer ratings and reviews

Nobody has posted a review yet

in this language

Rate it

100% tested

Tracking number

Return accepted within 14 days

The Original Apple iPhone XR earpiece:

The replacement earpiece for iPhone XR allows you to hear your interlocutors correctly.

Diagnosis justifying the change of your earpiece:

You can replace your earpiece if you have the following problems:

You no longer hear or hear your caller badly during a call
Earpiece sizzles during a call

The repair :

The estimated time to replace the iPhone XR earpiece is 15 minutes.

Our expert advice:

Before closing your iPhone completely, we strongly recommend that you test the earpiece before closing your iPhone for several reasons:

Confirm your diagnosis
Make sure the earpiece is in place
Ensure that the earpiece has not been damaged during transport

Perform the test:

Here are the steps to carry out the test confirming your diagnosis:

Remove the pentalobe screws holding the iPhone screen
Gently lift the screen using the tools
Remove the metal plates covering the battery and screen connection
Disconnect the battery connector first
Then unplug the cables from the screen
Remove your screen (the earpiece is attached to the back of the screen on the upper part)
Remove the screws holding the earpiece (usually 3 or 4 screws)
Remove the small metal plate holding the earpiece
Gently remove the earpiece by shifting the facetime camera cable (be careful not to damage the Facetime camera cable)
Remove the facetime camera very gently because it is stuck on the dust grid and risk tearing it apart if you do not go slowly
Remove the dust cover
Put the new dust cover in place (make sure it is well placed in its space and very stable)
Put your Facetime camera back on the dust grid
Put on our replacement iPhone XR headset (make sure you position it so that it makes good contact with the Facetime cable)
Replace the metal plate to hold the earpiece in place
Reconnect your screen to your iPhone
Then reconnect your battery
Don't close your iPhone
Turn on your iPhone
Make a call to test the speaker

CAUTION: an external speaker no longer working can also be due to a fault in the facetime camera because the iPhone XR earpiece works through contact made with the facetime camera.

Indeed, if your diagnosis is not confirmed, you can simply open a Return procedure directly on the site in order to obtain refund from the earpiece which will ultimately not serve you. izziphone after-sales service will accept this type of product return.

You no longer hear or have difficulty hearing your interlocutor during a call -> Telephone to ear (internal earpiece) -> Loudspeaker mode (external speaker)

Internal earpiece / external speaker sizzles during a call

Before attaching the spare iPhone replacement part with the fixing stickers (screen, battery, connector ...), we advise you to test the part.

This test will allow you to know if:

Your diagnosis is correct
The part works
The part is compatible

Otherwise, you can request a return on the site via the contact form.

You will be asked to return the spare part to us. Upon receipt, we will contact you for the exchange, or the refund.

The installation of this case takes 30 seconds and protects your iPhone forever,

Disconnect accessories that could be plugged into your iPhone (charging cable, earpods...).
Place the silicone case from the bottom of the iPhone
Find from the top of the iPhone
vet the 4 angles of the hull correctly placed

This shell is de adapted so as not to interfere with the installation of a full tempered glass.